Glass-reinforced polycarbonate is used in many industrial applications where metals are commonly used.
Bullet Resistant Polycarbonate which is an alternative to bulletproof glass. Tensile Property Evaluation of Woven Glass Fiber Reinforced Plastic and Aluminium Stack p.44. Plastics typically also have a 10 to 40% glass filled grade. The addition of glass fibers provide improved strength and stiffness and lower the thermal expansion. The coefficient of thermal expansion for unfilled grade is 3.75 x 10-5 in/in/°F dropping to 1.49 x 10-5 in/in/°F for a 20 % glass filled grade. Glass-Reinforced Polypropylene. Parametric Optimization of AWJM in AA6351-SiC-B 4 C Hybrid Composite Using Grey Relational Analysis p.38. Material Notes: Zelux polycarbonate is a transparent engineering plastic with excellent dimensional stability and good mechanical and electrical properties. Polymer; Thermoplastic; Polycarbonate (PC); Polycarbonate, Glass Fiber Filled, Flame Retardant. The addition of glass fibers provides improved strength and stiffness and lowers the thermal expansion. Polycarbonate is comparable to Lexan, Hyzod, Tuffak, and Makrolon. Table 1 shows the property profile of unfilled acetal homopolymer along with the typical 20% glass-filled grade and new grades that contain 10% and 25% glass where the fiber is coupled to the polymer matrix. The density of a plastic sample may change due to change in crystallinity, loss of plasticizers, absorption of solvent, etc.
Density measures the mass per unit volume.It is calculated by dividing the mass of the material by the volume and is normally expressed in g/cm 3. For example, you can order 10%, 20%, 430%, and 40% glass filled polycarbonate. Glass-Filled Polycarbonate– This glass-reinforced polycarbonate is used in many industrial applications where metals are commonly used. Glass Filled Nylon (Tradename: Ertalon 66GF30) ... Glass filled nylon also offers a higher maximum service temperatures compared to un filled grades. Stocked materials typically ship in 2-5 business days. The percentage corresponds to the percentage of glass fibers the polycarbonate material has been filled with. Saudi Basic Industries Corporation (SABIC) announced on August 31st, 2007, the completion of its purchase of GE Plastics. SABIC’s polymers portfolio is organized largely around the automotive, foam/lightweight and pipe segments, helping find the right alternatives to replace traditional materials – wood, cotton or glass – used in a vast array of consumer and industrial products. Different levels of protection are available. Glass fiber reinforced polycarbonate: Standard: G1910, G1920, G1930: Printer and copy machine parts, Liquid crystal projector parts, Mobile phone housings, power tool housing: Non-bromo, Non-phosphorus flame retardantV-0: GZ2510, GZ2520, GZ2530, GZ2540: Non-bromo flame retardantV-0: GGK1740 Polycarbonate is commonly used in eye protection, as well as in other projectile-resistant viewing and lighting applications that would normally indicate the use of glass, but require much higher impact-resistance. Adding glass fiber reinforcement will increase the Heat Deflection Temperature by 25°F; increase rigidity but lower impact strength, an important property of polycarbonate in many applications. Glass-reinforced polycarbonate is used in many industrial applications where metals, particularly die-cast aluminum and zinc, are commonly used. Glass filled polycarbonate has been filled with glass fibers in a variety of different amounts or levels. 10mm to 100mm thick Rod. Please Note: The information in this chart has been supplied by reputable sources and is to be used ONLY as a guide in selecting equipment for appropriate chemical compatibility. — Plastic Rods (Plastic Rod and Bar Stock) are extruded or compression-molded in more than 500 different plastic materials for a wide range of applications.
Polifil® GFPP series compounds are homopolymer polypropylene resins reinforced with glass fibers. Shop for Glass-Filled Polycarbonate sheets. The following stock shapes and sizes of Glass Filled Nylon are available to buy online - please select from: Sheet. Polycarbonate MG - 20% Glass-Filled (Standard Color Black) Polycarbonate is a transparent thermoplastic that exhibits extraordinary impact resistance and excellent electrical properties.